The Advantages Of Artificial Turf
October 15, 2024
Artificial Turf Market – Growth, Trends, and Forecasts (2023 – 2028)
October 15, 2024
We need to connect to the artificial turf and the bottom surface and interface of the cloth need to be cleaned, very clean, and keep the surface dry, no water; In the weather above five degrees the best temperature is good, and can not be in the rain or construction, will produce a viscosity is too long and viscosity is not strong. Artificial turf detailed construction technology: First of all, the ground brushing is more uniform, artificial turf can not be repeatedly brushed, so there will be foaming phenomenon. The thickness of the glue should be controlled more precisely. It needs to be achieved in various factors such as temperature, humidity, etc., and then the appropriate time to control the drying time. Normal control of ten to thirty minutes, as long as the glue dry to eight to 90%, hand contact, not sticky is almost. The connection should be done in one step and cannot be moved back and forth after the link. In the second, you need to clean up the mess next to them and then use a rubber mallet to secure the edges of the mallet to make them more densely glued. Generally need to wait for about 3 days to cure it, during the maintenance period should try to avoid contact or contact with water, the first non-stick quartz sand and rubber particles on the ground, in the artificial turf with cleaning agents.
Artificial turf construction attention: Artificial turf has largely been recognized by the people, but in the process of artificial turf laying, what points should be paid attention to? In reality, there are four aspects that need attention in the process of trying artificial turf again:
- Wrinkle: Artificial turf in the process of implementation, there are some standards to be done, which is also to ensure excellent efficacy. When laying, the construction personnel must carefully check, see the wrinkled place, must be dealt with in time. When adjusting, it needs to be handled in the correct way to avoid wrinkles, which will have safety hazards, and will affect the service life of the lawn.
-
Warping: The problem of warping is caused by three aspects, the first is the quality of the glue used is not qualified, the amount of glue used is small, the degree of adhesion is not qualified, the second is the time control is not appropriate, in general, the glue wait not immediately pasted under the artificial turf, need to wait for more than ten minutes, to be able to bond, the third in the sand, do not uniform or do not use much.
- Fill comb technology is not in place: the production standard is relatively high, in the construction, the construction personnel need to be carried out in accordance with the requirements, pay attention to the sand and comb synchronous. There is also a point to view the laying of artificial turf grass silk has not been combed straight problem, in the next work.
The problem of flatness: when laying, we must pay careful attention to ensure good flatness, we must use sand punching machine to combine the construction of artificial turf with artificial laying, and we must adjust repeatedly to meet the requirements of flatness.
